Free forever
Truck Pack
Plan how the show loads into the truck before you're standing at the dock. Volume, weight and load order in one view.
Home / Free tools
Free & self-serveProduction tools that earn their place.
Three calculators we built for our own shows, free forever and open without an account. Pack the truck, size the wall, load the power — then take the numbers straight to your budget.
Free forever
LED Wall Calculator
Work out panels, resolution, weight and power for any LED wall from pitch and dimensions. Get the spec right the first time.
Free forever
AV Power Calc
Sum the draw of your AV package, convert to amps per phase, and size distro and cable runs with headroom built in.
Truck Pack
Know it fits before the dock.
Add your cases, racks and pallets with their dimensions and weight, pick a vehicle, and Truck Pack tells you whether the show fits — by volume and by weight — and in what order it should load to come off in the right sequence.
Save a packing plan per truck and reuse it next time the same rig goes out. No more guessing at the loading bay or discovering the tail-lift is over its limit.
- +
Volume & weight check
Live fill percentage and an axle-weight warning before you roll.
- +
Load order
Sequence cases so the first thing needed is the last thing in.
- +
Reusable rigs
Save a standard load and pull it up for the next run.
7.5t box · main stage rig
Cases loaded38
Volume used82%
Total weight3,140 kg
Payload limitwithin limit
Fill
LED wall · 6m × 3.5m @ 3.9mm
Panels (500×500)12 × 7 = 84
Resolution1536 × 896
Weight≈ 630 kg
Peak power≈ 16.8 kW
Enter pitch and size — the rest is calculated.
LED Wall Calculator
Size the wall without the spreadsheet.
Enter the wall dimensions and panel pitch and the calculator returns panel count, total resolution, rigged weight and peak power draw. Switch panel sizes to see how the spec changes before you commit kit to the quote.
It's the fast sanity check between a client asking for "a big screen" and you putting a real, riggable, powered number on the page.
- +
Pitch to resolution
Get pixel dimensions and panel grid for any wall size.
- +
Weight & power
Rigged weight and peak draw to feed straight into rigging and distro plans.
AV Power Calc
Load the power, keep the headroom.
List the kit in your AV package with its power draw and the calculator totals the load, converts to amps per phase, and recommends distro with sensible headroom so you're not running a circuit at the redline all night.
It flags imbalance across phases and gives you a clean figure to hand the venue or the genny supplier — no back-of-the-hand maths at the dock.
- +
Watts to amps per phase
Three-phase and single-phase, with power factor accounted for.
- +
Headroom & balance
Distro sizing with margin and a warning when phases are uneven.
AV package · main room
Total load42.0 kW
Per phase≈ 61 A
Recommended distro63 A 3-phase
Phase balanceeven
Take the numbers further
From a quick calc to the full budget.
The tools are free and always will be. When you're ready to track estimates, actuals and variance on the floor, the full platform is one account away.